15-9o The screen at left is displayed.• The following dialog appears in the IC-R9500 display.RWARNING!: NEVER turn the IC-R9500 powerOFF at this stage.The receiver firmware will be corrupted.!0 Click [OK] to finish the firmware update.• The “FIRMWARE UPDATING” dialog as above disap-pears.!1 Push [POWER] to turn the IC-R9500 power OFF,then ON again.!2 Depending on the status of the update process, ei-ther of dialogs at left will appear in sequence.RWARNING!: NEVER turn the IC-R9500 powerOFF at this stage.The receiver firmware will be corrupted.!3 After the dialog disappears, the firmware update iscompleted and the normal operation screen ap-pears.RX-DSP UPDATING...Please wait for 20sec.WARNING! NEVER turn power OFF.Please wait for 45sec.WARNING! NEVER turn power OFF.Firmware up dating for the main CPU is completed.The sub CPU and/or DSP firmware update will start automatically depending on the updated contents,and this will take approx. 2 minutes.Turn the IC-R9500 power OFF, then ON again with [POWER] switch.After turning the power ON, the IC-R9500 will work with the updated firmware.DO NOT turn the IC-R9500 power OFF until the normal operational screen appears.Click [OK] to finish the firmware update.iR9500COMMUNICATIONS RECEIVERIC-R9500 IP AddressIC-R9500 IP AddressFirmware File NameVersion 1.00(C) 2006 Icom Inc.Firmware File NameConnecting to the IC-R9500.Connected to the IC-R9500.Transfer in progress...Transfer successful.Start update.Please wait a while.IC-R9500 Firm Utility15UPDATING THE FIRMWARE
