11-2411 SET MODE■ Display set (Video) mode This set mode is used to set the HSB (Hue,Saturation, Brightness) color setting for video input oroutput, etc.NOTE: “Display set mode” is described on page 11-8.q Push [DISPLAY] momentarily to turn the mini TVscreen, if necessary.w Push and hold [DISPLAY] for 1 sec. to select thedisplay set (Video) mode.e Push [F-1•Y] or [F-2•Z] to select the desired setitem.r Set the desired condition using the main dial.• Push and hold [F-4•DEF] for 1 sec. to select a defaultcondition or value.t Push [EXIT/SET] to exit from set mode.NOTE: Video output from [DATA IN] is available anNTSC system only.[EXIT/SET][DISPLAY] Main dial[F-1•Y] [F-2•Z] [F-4•DEF]Adjusts the saturation (vibrancy of the color) of thevideo signal from [VIDEO IN] jack. Adjustable rangeis 0 (shade of gray) to 100% (vivid color) in 1% steps.(default: 50%)Adjusts the hue (color type) of the video signal from[VIDEO IN] jack. Adjustable range is 0 (red) to 100(green) in 1 steps. (default: 50)NOTE: This setting is available when NTSC sys-tem signal is input from [VIDEO IN] connector.VIDEO IN Saturation 50%VIDEO IN Hue (NTSC) 50%Adjusts the LCD contrast of the video signal from[VIDEO IN] jack. Adjustable range is 0 (low contrast)to 100% (high contrast) in 1% steps. (default: 50%)VIDEO IN Contrast 50%Adjusts the LCD brightness of the video signal from[VIDEO IN] jack. Adjustable range is 0 (dark) to 100%(bright) in 1% steps. (default: 50%)VIDEO IN Bright 50%Selects the TV system of your local area from “NTSCM,” “PAL B/G,” “PAL I,” “PAL D” and “SECAM K.”NOTE: Default setting is different depending onversions.TV Standard NTSC M
