7-87 MEMORY OPERATIONDD Memory bank setSetting bank limit function for memory channel selec-tion, for memory scan can be set in bank set mode orprogramming bank name.q Select memory list screen as described at previouspage.w Push and hold [F-6•EDT/BANK] for 1 sec. to displaythe memory bank set mode.e Push [F-1•Y] or [F-2•Z] to select the desired item.r Rotate the main dial to set the desired setting.• Push and hold [F-4•DEF] for 1 sec. to select a defaultvalue.t Push [EXIT/SET] to return to memory list screen.Main dial[F-1•Y] [F-2•Z] [EXIT/SET][F-6•EDT/BANK][F-4•DEF]Selects the bank limit function for memory channelselection from ON and OFF. (default: ON)BANK (Memory Channels) ONSelects the bank limit function for memory scan fromON and OFF. (default: ON)BANK (Memory Scan) ON• Programming bank namesCapital letters, small letters, numerals, some symbols(! # $ % & ¥ ? " ’ ` ^ + – ✱ / . , : ; = < > ( ) [ ] { } | _ ~ @)and spaces can be used for bank name programming.q Push [F-1•Y] or [F-2•Z] to select the desired mem-ory bank.w Push [F-5•EDIT] to edit memory bank name.• A cursor appears and blinks.e Input the desired character by rotating the main dialor by editing the keypad for number input.• Push [ABC] or [abc] to toggle capital and small letters.• Push [123] or [Symbol] to toggle numerals and symbols.• Push [F-1•Ω] or [F-2•≈] for cursor movement.• Push [F-3•DEL] to delete the selected character.• Push [F-4•SPACE] to input a space.• Using the receiver’s keypad, [0]–[9], can also enter nu-merals.r Push [EXIT/SET] to input and set the name.• The cursor disappears.t Repeat steps q to r to program another memorybank’s name, if desired.y Push [EXIT/SET] to return to memory list screen.[F-1•Ω] [F-2•≈] [F-4•SPACE][F-3•DEL]Keypad[ABC]/[abc] [123]/[Symbol]
