■ IF filter selectionThe receiver has 3 passband width IF filters for eachmode.For FM mode, the passband width is fixed and 3 pass-band widths are available.For WFM and P25 mode, the passband width is fixed.For AM mode, the passband width can be set within200 Hz to 10 kHz in 200 Hz steps. A total of 50 pass-band widths are available.For SSB and CW modes, the passband width can beset within 50 to 3600 Hz in 50 or 100 Hz steps. A totalof 41 passband widths are available.For FSK mode, the passband width can be set within50 to 2700 Hz in 50 or 100 Hz steps. A total of 32 pass-band widths are available.The filter selection is automatically memorized ineach mode.The PBT shift frequencies are automatically memo-rized for each filter.DD IF filter selectionq Select the desired mode.w Push [FILTER] several times to select the IF filter 1,2 or 3.• The selected passband width and filter number is dis-played in the LCD.DD Filter passband width setting (except FM/WFM or P25 mode)q Push and hold [FILTER] for 1 sec. to enter filter setscreen.w Select any mode except FM/WFM or P25 mode.• Passband widths for FM modes are fixed and cannot be set.e Push [FILTER] several times to select the desired IFfilter.r While pushing [F-1•BW], rotate the main dial to setthe desired passband width.• In AM mode, the passband width can be set within thefollowing range.200 Hz to 10 kHz 200 Hz steps• In SSB and CW modes, the passband width can be setwithin the following range.50 to 500 Hz 50 Hz steps600 to 3600 Hz 100 Hz steps• In FSK mode, the passband width can be set within thefollowing range.50 to 500 Hz 50 Hz steps600 to 2700 Hz 100 Hz steps• Push and hold [F-4•DEF] for 1 sec. to select the default value.t Repeat steps w to r if desired.y Push [EXIT/SET] to exit filter set screen.The PBT shift frequencies are cleared when thepassband width is changed.This filter set screen graphically displays the PBTshift frequencies and operations.[FIL]5-125 RECEIVE FUNCTIONS
