7-47 MEMORY OPERATION■ Memory channel programming Memory channel programming can be performed ei-ther in VFO mode or in memory mode.DD Programming in VFO modeq Set the desired frequency, operating mode and fil-ter width in VFO mode.w Rotate [M-CH] (and [BANK]) to select the desiredmemory channel.• Memory list screen is convenient for selecting the de-sired channel.• Memory channel contents appear in the memory chan-nel readout (below the frequency readout).• “--.---.--” appears if the selected memory channel is ablank channel (and does not have contents).e Push and hold [MW] for 1 sec. to program the dis-played frequency, operating mode, etc., into thememory channel.DD Programming in memory modeq Select the desired memory channel with [M-CH] inmemory mode.• Memory channel contents appear in the memory chan-nel readout (below the frequency readout).• “--.---.--” appears if the selected memory channel is ablank channel (and does not have contents).w Set the desired frequency and operating mode inmemory mode.• To program a blank channel, use direct frequency entrywith the keypad.e Push and hold [MW] for 1 sec. to program the dis-played frequency and operating mode into the mem-ory channel.[MW] [M-CH][BANK]Push for 1 sec.BeepBeepBeepRotate[EXAMPLE]: Programming 7.088 MHz/LSB into mem-ory channel 12.Push for 1 sec.BeepBeepBeepRotate[EXAMPLE]: Programming 21.280 MHz/USB into mem-ory channel 18.
