8-48 SCANS■ Scan set mode This set mode is used to set the skip scan setting,memory clear condition for auto memory write chan-nels and appearing scan screen setting.q Push [F-5•SCAN] to select scan screen.w Push [F-7•SET] to select scan set mode.e Push [F-1•Y] or [F-2•Z] to select the desired item.r Rotate the main dial to select the desired condition.• Push and hold [F-4•DEF] for 1 sec. to select the defaultsetting.t Push [EXIT/SET] to return to scan menu.[F-1•Y] [F-2•Z] [F-4•DEF] [EXIT/SET] Main dialSelect the skip scan function ON or OFF. • ON : Scan skips the programmed memory channelin the skip memory bank while scanning (de-fault)• OFF : Skip function OFFSKIP Function ONSet the clearing condition for the auto memory writescan’s memories channels.• ON : Auto memory channels are cleared whenstarting the auto memory write scan.• [AUTO] Long Push: Auto memory channels are cleared whenpushing and holding [AUTO]. (default)• OFF : Auto memory channels must be cleared man-ually and auto memory write scan stops when100 channels (A00 to A99) are wrote.Auto MW SCAN Memory Clear [AUTO] Long PushSet the automatic scan screen ON function whenstarting a scan.• ON : When starting a scan, scan screen appearsautomatically. (default)• OFF : Scan screen does not appear until [F-5•SCAN] is pushed.Auto SCAN Screen (SCAN Start) ON
