8-128 SCANSDD Programming the select memory scan settingq Push [EXIT/SET] several times to close a multifunc-tion screen, if necessary.w Push [F-4•MEMORY] to select memory list screen.e While pushing and holding [F-1•ROLL] or [F-2•SET],rotate the main dial to select the desired memorychannel.• [M-CH] (or [BANK]) control and direct keypad selectioncan be used.r Push and hold [F-3•SELECT] for 1 sec. to displaythe memory-select window.t Rotate the main dial to select the desired selectmemory channel group.• ★1 to ★9 are selectable .• Memory-select window y Push [F-3•SELECT] to set the select setting ON.• Push [F-3•SELECT] again to select the select settingOFF.u Repeat steps e to y to program another memorychannel as a select memory channel, if desired.• If you want to set a same select channel group, skipsteps r and t.i Push [EXIT/SET] to exit the memory list screen.DD Erasing the select scan settingq Push [EXIT/SET] several times to close a multifunc-tion screen, if necessary.w Push [F-4•MEMORY] to select memory list screen.e Push and hold [F-3•SELECT] for 1 sec. to displaymemory-select window.r Rotate the main dial to select the desired selectmemory channel group to be erased.t Push and hold [F-2• ALL CLR] for 1 sec. to clear allselect scan settings.y Push [EXIT/SET] to exit the memory list screen.
