12-912MAINTENANCE■ Resetting the CPU q Turn the main power switch on the rear panel ON.• Make sure the receiver power is still OFF.w While pushing and holding [CE] and [M-CL], push[POWER] to turn power ON.• The internal CPU is reset.• The CPU start-up takes approx. 5 sec.• The receiver displays its initial VFO frequencies whenresetting is complete.e Correct the set mode settings after resetting, if de-sired.NOTE: Resetting CLEARS all programmed con-tents in memory channels and returns programmedvalues in set mode to default values.■ Screen saver function The IC-R9500 has a screen saver function to protectthe LCD from the “burn-in” effect.q Push [EXIT/SET] several times to close a multi-function screen, if necessary.w Push [F-7•SET] to select set mode menu screen.e Push [F-3•DISP] to enter the display set mode.r Push [F-1•Y]/[F-2•Z] several times to select the“Screen Saver Function” item.t Rotate main dial to select the desired time periodfor the screen saver activation from 15, 30, 60 min.and OFF.• Deactivate the screen saver with “OFF” selection.y Push [EXIT/SET] twice to exit the set mode.[F-1•Y] [F-2•Z] Main dial[EXIT/SET][F-4•DEF] [F-7•SET]/[F-7•WIDE][F-3•DISP][F-5•PREVIEW][CE] [M-CL][POWER]ALL CLEARiR9500
