7-67 MEMORY OPERATION■ Memory names All memory channels (including scan edges) can betagged with alphanumeric names of up to 10 charac-ters each.Capital letters, small letters, numerals, some symbols(! # $ % & ¥ ? " ’ ` ^ + – ✱ / . , : ; = < > ( ) [ ] { } | _ ~ @)and spaces can be used.DD Editing (programming) memory namesq Push [EXIT/SET] several times to close a multifunc-tion screen, if necessary.w Push [F-4•MEMORY] to select memory list screen.e Select the desired memory channel.r Push [F-4•NAME] to edit memory channel name.• A cursor appears and blinks.• Memory channel names of blank channels cannot beedited.t Input the desired character by rotating the main dialor by editing the keypad for number input.• Push [ABC] or [abc] to toggle capital and small letters.• Push [123] or [Symbol] to toggle numerals and symbols.• Push [F-1•Ω] or [F-2•≈] for cursor movement.• Push [F-3•DEL] to delete the selected character.• Push [F-4•SPACE] to input a space.• Using the receiver’s keypad, [0]–[9], can also enter nu-merals.y Push [EXIT/SET] to input and set the name.• The cursor disappears.u Repeat steps e to y to program another memorychannel’s name, if desired.i Push [EXIT/SET] to exit memory list screen.■ Memory clearing Any unused memory channels can be cleared. Thecleared memory channels become blank channels.q Select memory mode with [MEMO].w Push [F-4•MEMORY] to select memory list screen.e Select the desired memory channel with [M-CH].r Push and hold [M-CL] for 1 sec. to clear the con-tents.• The programmed frequency and operating mode disap-pear.t To clear other memory channels, repeat steps eand r.Push for 1 sec.BeepBeepBeep(CLR)[M-CL][F-1•Ω] [F-2•≈] [F-4•SPACE][F-3•DEL]Keypad[ABC]/[abc] [123]/[Symbol]
