7-57MEMORY OPERATION■ Frequency transferring The frequency and operating mode in a memory chan-nel can be transferred to the VFO.Frequency transferring can be performed in either VFOmode or memory mode.DD Transferring in VFO modeThis is useful for transferring programmed contents toVFO.q Select VFO mode with [VFO].w Select the memory channel to be transferred with[M-CH] (and [BANK]).• Memory list screen is convenient for selecting the de-sired channel.• Memory channel contents appear in the memory chan-nel readout (below the frequency readout).• “--.---.--” appears if the selected memory channel is ablank channel. In this case transferring is impossible.e Push and hold [M≈V] for 1 sec. to transfer the fre-quency and operating mode.• Transferred frequency and operating mode appear onthe frequency readout.DD Transferring in memory modeThis is useful for transferring frequency and operatingmode while operating in memory mode.When you have changed the frequency or operat-ing mode in the selected memory channel:• Displayed frequency, mode and filter setting aretransferred.• Programmed frequency and mode in the memorychannel are not transferred, and they remain in thememory channel.q Select the memory channel to be transferred with[M-CH] (and [BANK]) in memory mode.• And, set the frequency or operating mode if required.w Push and hold [M≈V] for 1 sec. to transfer the fre-quency and operating mode.• Displayed frequency and operating mode are transferredto the VFO.e To return to VFO mode, push [VFO] momentarily.TRANSFERRING EXAMPLE IN VFO MODEOperating frequency : 21.320 MHz/USB (VFO)Contents of M-ch 16 : 14.018 MHz/CWTRANSFERRING EXAMPLE IN MEMORY MODEOperating frequency : 21.320 MHz/USB (M-ch 16)Contents of M-ch 16 : 14.018 MHz/CWPush for 1 sec.BeepBeepBeepRotatePush for 1 sec.BeepBeepBeepProgrammed contents appear.
