JBL Performance AV1 User Manual

Also see for Performance AV1: Brochure Manual

Contents

AV1Mode Adjust5-136. When playback of the calibration source is in progress, set theSPEAKER ANGLE parameter (next column) so the sound is notheard in the left ear.7. Set the SOURCE parameter to LEFT.8. When playback of the calibration source is in progress, set theSPEAKER ANGLE parameter so the sound is not heard in the right ear.9. Set the SOURCE parameter to LEFT & RIGHT to confirm theSPEAKER ANGLE and LISTENER POS parameter settings. When thePANORAMA listening mode is properly calibrated, the soundshould be perceived to come from all around the primary listeningposition. If this does not occur, begin again with step 1.SOURCE RIGHT, LEFT & RIGHT, LEFTControls the perceived direction of the calibration source signal.When set to RIGHT, the sound is perceived to come from the rightof the primary listening position. When set to LEFT, the sound isperceived to come from the left of the primary listening position.When set to LEFT & RIGHT, the sound is perceived to come from allaround the primary listening position.Note:The SOURCE parameter controls the perceived direction of thesound, although both the front left and right speakers generatethe calibration source signal.The +0 setting indicates a primary listen-ing position centered between the frontleft and right speakers.Negative settings (-127 to -1) compen-sate for primary listening positionslocated to the left of the center betweenthe front left and right speakers.Positive settings (+1 to +127) compen-sate for primary listening positionslocated to the right of the center betweenthe front left and right speakers.