                                                                                                                                                                | |
Contents
|
AV1Setup3-29REAR L/R FULL, 30Hz TO 120Hz, THX 80Hz, NONEOpens the REAR L/R SPEAKERS menu, which is used to a crossoverpoint for the audio output connectors labeled Rear L/R. When setto FULL, the AV1 sends a full-range audio output signal to theseconnectors. Otherwise, the AV1 activates a crossover point at theselected setting. Choose the setting closest to the low-frequencyrating of associated speakers.When set to NONE, the AV1 redirects rear channel signals to theaudio output connectors labeled Side L/R. If the CUSTOM SETUPmenu SIDE L/R parameter is also set to NONE, the AV1 redirectssurround channel signals to the audio output connectors labeledFront L/R.Note:When the REAR L/R parameter is set to NONE:• Dolby Digital Surround EX, THX Ultra2, THX Surround EXand DTS-ES decoding are not available.• The ASA parameter is not available.MAIN MENUMODE ADJUSTAUDIO CONTROLSSETUPSETUPINPUTSSPEAKERSREAR PANEL CONFIGDISPLAYSVOLUME CONTROLSTRIGGERLOCK OPTIONSSPEAKER SETUPCUSTOM SETUPTHX SETUPSPEAKER DISTANCESLEVELS CALIBRATIONCR SR RRL SL RLMSUB40Hz 60Hz 60Hz60Hz40Hz 40Hz 60Hz 60HzREAR L/R SPEAKERSFULL30 Hz40 Hz50 Hz60 Hz70 Hz80 Hz80 Hz90 Hz100 Hz110 Hz120 HzCUSTOM SETUPFRONT L/RCENTERSIDE L/RREAR L/RSUBWOOFERULTRA2 SUBBGCASA40 Hz60 Hz60 Hz60 Hz40 HzOFFN/AAPARTSPEAKERSSETUP CUSTOM SETUP REAR L/R |
Related manuals for JBL Performance AV1
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine