                                                                                                                                                                | |
Contents
|
Mode AdjustJBL Performance5-26The table at the bottom of the previous page indicates the con-ditions in which THX Ultra2 and DTS-ES decoding are engaged.• THX Ultra2 decoding is engaged when the ES DECODINGparameter is set to OFF, or the ES DECODING parameter is setto AUTO and a 5.1-channel DTS source is detected.• DTS-ES decoding is engaged when the ES DECODINGparameter is set to ON, or the ES DECODING parameter is setto AUTO and a 5.1-channel matrix-encoded or 6.1-channeldiscrete-encoded DTS-ES source is detected.• Listening mode name differs depending on the encodingpresent in the input source, the ES DECODING parameter set-ting and the speaker setup.– The DTS THX ULTRA2 listening mode is available when THXUltra2 decoding is engaged.– The DTS-ES THX listening mode is available when DTS-ESdecoding is engaged.– The DTS THX ULTRA2 and DTS(-ES) THX listening modescannot be activated unless side and rear speakers arepresent.MUSIC• Designed for playback of 5.1-channel DTS music sources.• The DTS THX MUSIC listening mode cannot be activatedunless side and rear speakers are present.• ASA processing is applied to signals sent to the rear speakers.Refer to the ASA parameter description on page 3-32 formore information.• Recommended for home theaters with THX-certified speakersetups.See “Listening Mode Menu Option & Parameter Descriptions” on page 5-29 for detaileddescriptions.Note:The DTS THX MUSIC listening mode can only be activated withthe front-panel or remote control Mode and buttons.Option/Parameter Default Setting Possible SettingsLFE MIX +0.0dB -10.0dB to +0.0dBOUTPUT LEVELS -- --CUSTOM -- --MUSICMODE ADJUST |
Related manuals for JBL Performance AV1
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine