JBL Performance AV1 User Manual

Also see for Performance AV1: Brochure Manual

Contents

AV1Setup3-33THX SPEAKER SETUPSWhen the SPEAKER SETUP menu THX SETUP option is selected, theTHX SPEAKER SETUP message appears in the on-screen and front-panel displays. When this message appears, press the Menu arrow to open the THX SETUP menu and configure the audio out-put connectors for a THX speaker setup or press the Menu arrowto close the message without configuring the audio output connec-tors for a THX speaker setup. THX-certified speakers are recom-mended for a THX speaker setup.When the THX SPEAKER SETUP menu opens, the audio output con-nectors are configured for a THX speaker setup. The AV1 ignores allCUSTOM SETUP menu parameter settings and applies a THX 80Hzcrossover point with a 12dB-per-octave filter to all output connec-tors, except the output connector labeled Subwoofer, which isassigned a 24dB-per-octave filter.Note:A THX speaker setup is not required to activate THX listeningmodes.SPEAKERSSETUP THX SETUPMAIN MENUMODE ADJUSTAUDIO CONTROLSSETUPSETUPINPUTSSPEAKERSREAR PANEL CONFIGDISPLAYSVOLUME CONTROLSTRIGGERLOCK OPTIONSSPEAKER SETUPCUSTOM SETUPTHX SETUPSPEAKER DISTANCESLEVELS CALIBRATIONCR SR RRL SL RLMSUB40Hz 60Hz 60Hz60Hz40Hz 40Hz 60Hz 60HzTHX SETUPFRONT L/R*CENTER*SIDE L/R*REAR L/R*SUBWOOFER*ULTRA2 SUBBGCASA40 Hz60 Hz60 Hz60 Hz40 HzOFFN/AAPARTTHX SPEAKER SETUP!CAUTION!PRESSING THEBUTTON WILLAUTOMATICALLY CHANGETHE OUTPUTS TO A THXSPEAKERCONFIGURATION*These parameters cannot beadjusted.When a THX speaker setup is selected, all CUSTOMSETUP menu parameters are automatically set toTHX 80 Hz. However, a custom speaker setup canstill be configured with the CUSTOM SETUP menu.ParameterDefaultSettingPossibleSettingFRONT L/R* THX 80Hz THX 80HzCENTER* THX 80Hz THX 80HzSIDE L/R* THX 80Hz THX 80HzREAR L/R THX 80Hz THX 80Hz, NONESUBWOOFER* THX 80Hz THX 80HzTHX ULTRA2 SUB OFF ON, OFFBGC N/A ON, OFFASA APART TOGETHER, CLOSE, APART* These parameters cannot be adjusted.