JBL Performance AV1 User Manual

Also see for Performance AV1: Brochure Manual

Contents

Mode AdjustJBL Performance5-34PANORAMA ON, OFFWhen set to ON, extends the front stereo image to include surroundchannel signals, which creates a “wraparound” effect with side wallimaging.Note:The DOLBY PLII MUSIC listening mode PANORAMA parameter should notbe confused with the separate PANORAMA listening mode (page 5-12).PRE-DELAY OFF, 1ms to 100msAdjusts delay time between the direct sound and the onset of rever-beration. Higher settings make the simulated space sound larger.Because some pre-delay is inherent in all source material, it is rec-ommended to begin with the parameter set to OFF, then makeadjustments accordingly.RE-EQUALIZER ON, OFFSimulates high-frequency rolloffs that occur in movie theaters.When set to ON, the AV1 applies a high-frequency filter. When setto OFF, the AV1 does not apply a high-frequency filter. It is recom-mended that you set this parameter to ON for film sources, asmany films are mixed for movie theaters and might sound toobright when played back in home theaters without re-equalization.REAR DLY OFFSET OFF, 1ms to 30msIncreases the perceived depth of the listening space by delaying thearrival time of rear speaker signals. It is recommended that youincrease the setting when using side and rear speakers that arelocated close together or when a greater sense of depth is desiredin the listening space.REAR L/R OFF, -30dB to +12dBControls the output level of the audio output connector labeledRear L/R.RESET MODERestores the factory-default version of the selected listening mode,restoring all listening mode menu parameters to their factory-default settings.To restore the factory-default version of the selected listening mode:1. Follow the RESET MODE menu path. The “PRESS RIGHT V TORESTORE MODE” drop-down message.2. When the drop-down message opens, press the Menu arrow to restore the factory-default version of the selected lis-tening mode and close the message. Press the Menu arrowto close the message without restoring the factory-default ver-sion of the selected listening mode.3. Press the Menu arrow to close the CUSTOM menu andreturn to the listening mode menu.Note:When the CUSTOM menu RESET MODE option is selected to restorethe factory-default version of the selected listening mode, the corre-sponding TRIGGER SETUP menu listening mode parameter is auto-matically set to OFF.(Listening Mode)MODE ADJUST OUTPUT LEVELS REAR L/R(Listening Mode)MODE ADJUST CUSTOM RESET MODE