JBL Performance AV1 User Manual

Also see for Performance AV1: Brochure Manual

Contents

SetupJBL Performance3-52TRIGGER SETUPSelecting the SETUP menu TRIGGER option opens the TRIGGERSETUP menu, which is used to configure the programmabletrigger output (Trigger 1) in the 5-pin DIN connector locatedon the back panel. The 5-pin DIN connector provides 12VDCoutputs for externally controlling compatible components. ThePower Trigger pin cannot be configured and is active when theAV1 is active (not in Standby). The Trigger 1 output pin can beconfigured for remote or programmed operation. The Trigger 2output cannot be configured, but provides an output voltagethat is opposite that of the Trigger 1 output pin. If Trigger 1 isON (at 12VDC), Trigger 2 is at ground potential. If Trigger 1 isOFF (at ground), Trigger 2 is at 12VDC.All TRIGGER SETUP menu parameters – except the REMOTE ONLY parameter –are considered program operation parameters.ParameterDefaultSettingPossibleSettingsREMOTE ONLY ON ON, OFFProgram Operation OFF ON, OFFTRIGGERSETUPREMOTE ONLY ON, OFFConfigures Trigger 1 for remote operation. When ON, Trigger 1 is configured for remoteoperation. Pressing and holding the S1 button while pressing and releasing the OSDbutton activates the connector. Pressing and holding the S1 button while pressing andreleasing the Blue button deactivates the connector. The AV1 ignores all other TRIGGERSETUP menu parameter settings. When OFF, Trigger 1 is not configured for remoteoperation. It can be configured for program operation.TRIGGERSETUP REMOTE ONLYMAIN MENUMODE ADJUSTAUDIO CONTROLSSETUPSETUPINPUTSSPEAKERSREAR PANEL CONFIGDISPLAYSVOLUME CONTROLSTRIGGERLOCK OPTIONSTrigger 2Trigger 1Power Trigger GroundGroundTRIGGER SETUPREMOTE ONLYDVD1DVD2ONOFFSATVCRTVCDTUNERAUXFILMTVMUSICMUSIC SURRPLII MOVIEPLII MUSICPLII +PRO LOGICPL +CINMUSIC+NIGHTCLUBCONCERT HALLCHURCHCATHEDRALPANORAMAPARTY2-CHANNELMONO LOGICMONO SURROUNDMONO5.1 FILM5.1 TV5.1 MUSICSurEXMUSICDIGITAL EX5.1 2-CHANNEL5.1 MONO LOGIC5.1 MONO SURR5.1 MONOFILMMUSICMUSIC2-CHAN5.1a BYPASS2CH BYPASSONOFFOFFOFFOFFOFFOFFOFFOFFOFFOFFOFFOFFOFFOFFOFFOFFOFFOFFOFFOFFOFFOFFOFFOFFOFFOFFOFFOFFOFFOFFOFFOFFOFFOFFOFFOFFOFFOFFOFFOFFOFFOFFOFFOFFOFFOFFOFFOFF* TRIGGER SETUP menulistening mode namesare fixed, meaningthese names do notchange when certainencoding is present.For instance, the 5.1THX SurEX listeningmode label appearswhether THX Ultra2,THX Surround EX, orn o e n c o d i n g i sengaged.