JBL Performance AV1 User Manual

Also see for Performance AV1: Brochure Manual

Contents

AV1Basic Operation2-9COMMAND BANK ACTIVATIONThe remote control buttons perform different commands depend-ing on which command bank is activated. The remote control con-tains three command banks:• default• S1 (Shift 1)• S2 (Shift 2)The default command bank remains activated unless the Shift 1 orShift 2 command bank is activated.The Shift 1 and Shift 2 buttons themselves do not send commandsto the AV1. When pressed and held, these buttons activate theassociated command bank. For instance, pressing the remote con-trol L7 button selects the Logic 7 listening mode. Pressing andholding the Shift 1 button while pressing the L7 button selects thePanorama listening mode. Pressing and holding the Shift 2 buttonwhile pressing the L7 button selects the PARTY listening mode.The default command bank does not need to be activated; itremains activated unless the Shift 1 or Shift 2 command bank isactivated.• Pressing and holding the remote control S1 button activatesthe Shift 1 command bank.• Pressing and holding the remote control S2 button activatesthe Shift 2 command bank.• The S1 and S2 buttons themselves do not send commands tothe AV1. When pressed and held, these buttons activate theassociated command bank.To activate the Shift 1 or Shift 2 command bank:1. Press and hold the remote control S1 button or S2 button toactivate one of the command banks.2. While holding the selected button, press the desired remotecontrol button to send the associated command to the AV1.3. Release the S1 or S2 button to deactivate the associated com-mand bank.The ON-SCREEN DISPLAY menu REMOTE STATE parameter controlsthe remote control command bank indicator. When the REMOTESTATE parameter is set to ON, a command bank indicator appearsin the top-right corner of the on-screen display indicating the lastcommand bank used. When the REMOTE STATE parameter is set toOFF, no command bank indicator appears on the on-screen display.• A "1" appears when a command from the Shift 1 commandbank was received last.• A "2" appears when a command from the Shift 2 commandbank was received last.• No letter appears when a command from the default com-mand bank was received last.