Basic OperationJBL Performance2-10COMMAND MATRIXThe command matrix describes the commands remote control buttons perform wheneach command bank is active.Button Main Zone Shift 1 Shift 21 Deactivates standby mode andactivates the AV1.Reserved for possiblefuture expansion.Reserved for possiblefuture expansion.2 Activates standby mode anddeactivates the AV1.Reserved for possiblefuture expansion.Reserved for possiblefuture expansion.3 Toggles the FRONT PANELDISPLAY menu STATUS param-eter between ALWAYS OFF andits current setting.Centers the AUDIO CON-TROLS menu BALANCEand FADER parameters.Reserved for possiblefuture expansion.4 Toggles the ON-SCREEN DIS-PLAY menu BACKGROUNDparameter between ON andOFF.Deactivates the trigger out-put connector (1) whenthe connector is config-ured for remote operation.Sets the AUDIO CON-TROLS menu BASS,TREBLE, and TILT EQparameters to +0.0dB.5 Toggles the ON-SCREEN DIS-PLAY menu STATUS parameterbetween ALWAYS OFF and itscurrent setting.Activates the trigger outputconnector labeled 1 whenthe connector configuredfor remote operation.Reserved for possiblefuture expansion.6 Displays the two-line status for2 seconds.Toggles between openingand closing the STATUSmenu for the current inputsource.Reserved for possiblefuture expansion.7 Activates an additional bank of commands that control the AV1. See “Command BankActivation” on page 3-9 for more information.8 Activates an additional bank of commands that control the AV1. See “Command BankActivation” on page 3-9 for more information.24731685