AppendixJBL PerformanceA-2SPECIFICATIONSAudio Input & Output ConnectorsAnalog Audio Inputs 8 stereo (RCA) or 5 stereo and one 5.1-channel or 2 stereoand two 5.1-channel connectorsDigital Audio Inputs • 4 S/PDIF coaxial (RCA) and 4 S/PDIF optical (TosLink)connectors• Coaxial and optical input connectors conform to IEC-958, S/PDIF standards• Accepts 44.1, 48, 88.2 and 96kHz sample rates• Accepts 16-24 bits PCM audio, Dolby Digital, DTS andDTS-ES discrete data formatsAudio Outputs 8 unbalanced (RCA) connectors for Front L/R, Center,Subwoofer, Side L/R, and Rear L/RAudio PerformanceA/D Conversion 24-bit, 96kHz, dual-bit ∆Σ architectureD/A Conversion 24-bit, 44.1 to 192kHz, multi-bit ∆Σ architectureFrequency Response 10Hz to 20kHz, +0.05dB/-0.1dB, -0.5dB at 40kHz, reference1kHzTHD + Noise Below 0.008% at 1kHz, maximum output levelDynamic Range 108dB minimum, 22kHz bandwidthSignal-to-Noise Ratio 108dB minimum, 22kHz bandwidthInput Sensitivity 200mVrms (2Vrms for maximum output level) at 0dB inputgainInput Impedance 100kΩ in parallel with 150pFOutput Level • 150mVrms typical, 6Vrms maximum• Maximum value with full-scale input signal and volume at+12dBOutput Impedance 100Ω in parallel with 150pFVideo Input & Output ConnectorsVideo Inputs 5 composite (RCA), 5 S-video, and 3 component video (RCA)Video Outputs 1 composite (RCA), 1 S-video, and 1 component (RCA)Composite & S-video PerformanceCompatibility NTSC, PAL, and SECAMSwitching ActiveOutput Level 1.0V peak-to-peakImpedance 75ΩInput Return Loss >40dBDifferential Gain <0.5%Differential Phase <0.5°Bandwidth >25MHzK Factor <0.3%Gain ±0.15dBSignal-to-Noise Ratio >65dBFrequency Response 10Hz to 10MHz + 0.1/-0.3dB