K-M IX E DITOR94P HONES O UTPUT F ADERThe stereo headphone output has its own fader.• Range: -∞ – +6dB• The headphone output fader is blue.• The headphone output fader controls the final output level of the headphone output.M AIN O UTPUT F ADERThe main output stereo pair has its own fader.• Range: -∞ – 0dB• The main output fader is blue.• The main output fader controls the final output level of the main output channels (outputs 1 &2).5.1.2.2 – D ECIBEL N UMBER B OXESThe number boxes show the exact numerical value the faders are set to in dB(decibels).• Range: -∞dB – +6dB• You can manually type in a level for the associated fader with these. Just click anywhere in thenumber box and start typing.• The fader will jump to whatever value is entered (assuming it is in the correct range).• Any out of range values will be clipped to either the minimum or maximum value (depending on ifthe entered value is lower than the minimum or higher than the maximum).5.1.2.3 – C HANNEL S ELECT B UTTONSThe channel select buttons above each fader are used to select the currentlyfocused channel. They’re also used to identify what input channel or output busthe associated fader is in charge of.• Each input channel and output bus has its own channel select button.• When a channel is selected, the editor displays that channel’s channel stripsettings in the main tab area (just above the fader section). This happens even if you are notcurrently viewing the Channel Strip Tab.E DIT M ULTIPLE• Holding down the Shift key on your computer keyboard while clicking a channel select buttonallows you to edit the Channel Strip settings of multiple channels at the same time.• This can only be done with the eight input channels. Edit Multiple is not available for the Aux,Phones, or Mains channels.-4.00 dB1