Keith McMillen Instruments K-MIX User Manual
Also see for K-MIX: Quick start guide
                                                                                                                                                            | |
Contents
| 
K-M IX H ARDWARE514.2.7.3 – M UTING C HANNELSMuting audio channels is achieved with use of the [SHIFT] button.1. Press and hold the [SHIFT] button.2. Tap the bottom of a fader to mute that channel’s audio.3. Tap the bottom of that fader again to unmute that channel’s audio.V ISUAL F EEDBACK• When a channel is muted its channel select button will turn red and the fader LEDs will turn offto show that it is currently muted.• When a channel is not muted its channel select button will be green and its fader will return tonormal brightness levels.4.2.7.4 – S OLOING C HANNELSSoloing channels is very similar to muting channels; it is achieved using the [SHIFT] button.1. Press and hold the [SHIFT] button.2. Tap the top of a fader to solo that channel.3. Tap the top of that fader again to unsolo that channel.Multiple channels may be soloed simultaneously, just tap the top of multiple faders while holding downthe [SHIFT] button to add them to the soloed group.When a channel is soloed, that will be the only audio going through to the outputs. Non-soloed trackswill effectively be muted. To get all audio behaving normally, just unsolo any channels that currentlyhave solo enabled; once there are no channels currently soloed, audio will pass through as normal.V ISUAL F EEDBACK• When a channel is soloed its channel select button will turn yellow to show that it is currentlysoloed.• The fader LEDs of all currently unsoloed channels will dim to help show that they are notcurrently being heard.• Once there are no longer any soloed channels, all faders will return to normal brightness levels.4.2.7.5 – M UTE + S OLO S IMULTANEOUSLYIt is possible for a channel to be muted and soloed simultaneously.1. Press and hold the [SHIFT] button.2. Tap the bottom of a fader to mute a channel.Only input channels may be soloed; output channels do not have this functionality.Trying to solo the “Master” fader will not do anything. |
Related manuals for Keith McMillen Instruments K-MIX
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine