Keith McMillen Instruments K-MIX User Manual
Also see for K-MIX: Quick start guide
                                                                                                                                                            | |
Contents
| 
K-M IX E DITOR118T OGGLE /M OMENTARY S WITCHSets whether the currently selected button behaves as a momentary or toggle button.R OTARIESEach of the K-Mix rotaries can output a CC message when in one of thethree available MIDI banks.• The rotaries can be set to output any MIDI CC from 0–127.B ANK 1 CC#Sets the CC number the currently selected rotary will send when inbank 1.B ANK 2 CC#Sets the CC number the currently selected rotary will send when inbank 2.B ANK 3 CC#Sets the CC number the currently selected rotary will send when in bank 3.5.2.4.3 – MIDI C HANNEL S ECTIONUsed to set the MIDI channel for each of the three MIDI banks.• The MIDI channel settings are global for all faders/buttons/rotaries.For example, when bank 1 is set to channel 3, all sensors will outputMIDI messages on channel 3 when in bank 1. It is not possible to set adifferent MIDI channel for individual sensors.• Banks cannot be set to the same MIDI channel; they must always be set to different MIDI channels.5.2.4.4 – S AVE G LOBALS B UTTONUsed to save the current state of all global settings to the K-Mix hardware’s internal memory.Any changes made in the editor to “global” parameters (parameters that are not stored on a per presetbasis) will be immediately reflected and heard on the connected mixer, but they will not be stored in itsinternal memory. If power is lost and the K-Mix is turned on again, all changes will be lost; it will boot upwith its last saved state. When you have found settings you would like to keep, it is wise to use the SaveGlobals button to make sure your global settings are not forgotten.The other method to make sure your global settings are remembered between power cycles is topower down your K-Mix by holding down the [ ] for three seconds. Powering down in this manner willensure all global settings are saved to your K-Mix’s internal memory; simply unplugging your K-Mix fromits power source will not do this. More information about global parameters can be found in section5.1.1.10 – “Global” Parameters vs. “Per Preset” parameters.Bank 1 CC#Bank 2 CC#Bank 3 CC#ROTARY 11231 2 3Bank 2Bank 1 Bank 3MIDI CHANNELSAVE GLOBALS |
Related manuals for Keith McMillen Instruments K-MIX
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine