Keith McMillen Instruments K-MIX User Manual
Also see for K-MIX: Quick start guide
                                                                                                                                                            | |
Contents
| 
K-M IX E DITOR1225.3.1.3 – C HANNELS 3–8 L INE /P HONO S WITCHESSets whether channels 3–8 are expecting line level or phono level signals. Each channel has its ownswitch with two possible states:• Line = Input channel is expecting line level signals• Phono = Input channel is expecting phono level signalsTypically “Phono” will only be used when plugging turntables directly into K-Mix. Most other equipmentwill operate at line level.5.3.1.4 – P ASS T HRUTwo switches that enable/disable “Pass Thru” for the fadersand/or rotaries.With the lack of traditional knobs or faders, K-Mix allowsyou to make discontinuous jumps; if you want to jump from11 to 127 you don’t have to move the faders through everyvalue in-between. This can be very useful in some situations, but could be less than desirable for somepeople.Pass Thru is meant to solve this. When both are enabled, faders and rotaries will not move until yourfinger “passes through” the current value. This will prevent any discontinuous jumps that may occurotherwise. You can enable pass thru for faders and rotaries separately if you prefer.Other software/hardware may sometimes refer to this functionality as fader “takeover”.• ON = Pass Thru is enabled.• OFF = Pass Thru is disabled.• By default, Pass Thru is disabled.5.3.1.5 – E XPANDER C ONTROLThe “Expander Control” switch will enable/disable the ability to control K-Mix via the MIDI Expander(sold separately). It is advisable to keep this setting disabled unless you are using a MIDI Expander tocontrol K-Mix. More information about controlling K-Mix using a MIDI Expander can be found in section4.3.5 - MIDI Input via MIDI Expander.Channels 3-8 Line/Phono Switches, Pass Thru, and Expander Control are editor-onlyparameters. They may not be adjusted from the mixer.Expander ControlPass ThruFaders Rotaries |
Related manuals for Keith McMillen Instruments K-MIX
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine