Keith McMillen Instruments K-MIX User Manual
Also see for K-MIX: Quick start guide
                                                                                                                                                            | |
Contents
| 
K-M IX E DITOR885.1.1.6 – S END A LL B UTTONThe SEND ALL button is used to send all presets in the Setlist down to themixer. This is essentially a less cumbersome way of clicking every individualSEND button.5.1.1.7 – R ECEIVE A LL B UTTONThe RECEIVE ALL button is used to copy all presets currently stored on theconnected K-Mix hardware into the editor. Similar to the SEND ALL button,the RECEIVE ALL button is a less cumbersome way of clicking every individualRECEIVE button.5.1.1.8 – S ETLISTThis section is where you can select which presets will be loaded ontoyour K-Mix, and the order they will appear in. It is extremely important tobecome familiar with the Setlist if you intend to use your K-Mix’s presetstorage capabilities.S LOTS A–LThese 12 slots hold the presets that will go onto your K-Mix whensynced.• Slots A–L correspond to presets A–L on the mixer hardware. If youplace a preset named “Drums” on slot C and send it to the mixer,the “Drums” preset will be loaded anytime preset C is recalled fromthe mixer.• Each slot has a drop-down menu that lets you select which preset to load in the selected slot.Simply click the drop-down menu and select a preset to load it into that slot. The drop-downmenu will have a list of all presets currently in the Preset Library.• A preset may not be loaded in multiple setlist slots (unless it is the special DEFAULT option). Ifyou would like multiple preset slots to have the same settings it is recommended you createmultiple copies of that preset (via the SAVE AS button). Another alternative is to just use a singlepreset and not use K-Mix’s preset capabilities.There are two special options available in the Setlist drop-down menus:[OFF][OFF] is one of two special options available in the Setlist drop-down menus.• When a Setlist slot is set to [OFF], that slot will no longer participate in editor-to-mixer andmixer-to-editor syncing. It will skip that slot when the SEND ALL button is clicked, and theeditor will skip that slot when syncing presets.Simply selecting a preset in a Setlist slot does not automatically place them ontoyour connected K-Mix. Presets must be sent to the mixer by using either the SENDbutton or the SEND ALL button. |
Related manuals for Keith McMillen Instruments K-MIX
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine