Keith McMillen Instruments K-MIX User Manual
Also see for K-MIX: Quick start guide
                                                                                                                                                            | |
Contents
| 
K-M IX H ARDWARE484.2.6 – P RESETThe [PRESET] button is used to enter and exit “Preset Selection Mode”. This modehandles selecting, saving, and resetting K-Mix presets.4.2.6.1 – S ELECTING A P RESETSelecting a preset will load that preset’s settings on K-Mix, overwriting the current state of the mixer.To select a preset on K-Mix:1. Press and release the [PRESET] button. The [PRESET] button and the currently selected preset’sbutton will light up bright. You are now in Preset Selection Mode.2. Press one of the 12 mode buttons labelled A–L to select that preset. The button will blink a fewtimes to indicate a selection has been made.3. That is all. The preset’s contents will be loaded immediately and you will automatically be takenout of Preset Selection Mode — K-Mix will return to whatever mode you were in prior to selecting apreset.If, after entering Preset Selection Mode, you decide you do not want to change presets, pressingthe [PRESET] button again will exit Preset Selection Mode and return you to the mode you were inpreviously.Some special behaviors occur when selecting a preset from the mixer hardware while connected to theK-Mix Editor. These are detailed in the Preset Library section.4.2.6.2 – S AVING A P RESETPresets can be saved directly from the K-Mix hardware. Saving a preset will overwrite one of the 12available preset slots with the current state of K-Mix’s parameters.To save a preset on K-Mix:1. Press and release the [PRESET] button. The [PRESET] button and the currently selected preset’sbutton will light up bright. You are now in Preset Selection Mode.2. Press and hold the [SHIFT] button. All of the 12 mode buttons labelled A–L will light up bright.3. While [SHIFT] is still held down, press one of the lit up mode buttons (labelled A–L) to save to itsassociated preset slot. The selected button will blink to show that the save has been performed.4. If desired, you can continue saving K-Mix’s current settings to other preset slots by holding downthe [SHIFT] button and pressing other mode buttons.5. Once you are done saving presets, release the [SHIFT] button.6. Exit Preset Selection Mode by pressing the [PRESET] button, which will return you to the currentlyselected preset, or press one of the 12 mode buttons labelled A–L to select and load that preset(and automatically exit Preset Selection Mode).When saving a preset, only “per preset” parameters are stored in the preset. “Global” parameters arenot stored as part of the presets. For more information on “global” vs. “per preset” parameters, pleasesee section 5.1.1.10 – “Global” Parameters vs. “Per Preset” Parameters. |
Related manuals for Keith McMillen Instruments K-MIX
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine