K-M IX E DITOR108• Aux 3 = Monitoring outputs 7 & 8• Ch. 1–8 = Monitoring input channels 1–8• Discrete Stereo Output = Act as its own output bus (outputs 9 & 10)Click one of the buttons to change the headphones monitoring point.5.2.1.4 – M AIN O UTPUT C HANNEL S TRIPThe main output bus (outputs 1 & 2) has its own channel strip. The effects in this channel strip areapplied to the entire stereo mix going to the main outputs.With a few exceptions, the main output bus channel strip is nearly identical to the channel strips of the 8input channels.As you may be able to see, there are a few differences from the input channel strips.1. There is no Input Trim, Rumble Filter, or Stereo Pairs.2. There is no Routing section.3. There is an additional Reverb Level section.Apart from those differences, the main output channel strip behaves the same as the input channelstrips.Only one option may be selected at a time. It is not possible to select multiplemonitoring points simultaneously.HILevel0.00 dB0.00 dB24.00 dB-70.00 dB -24.00 dB-4.51 dB10 ms10 ms50 ms50 ms0.00 dB1.0010.000.00 dB3.24 kHz346 Hz276 HzLevelLevelQFreqThresh RatioThresh Gain Reduc.Attack ReleaseReturn LevelReleaseAttackFreqFreqMIDLOWEQUALIZER COMPRESSOR GATE REVERBMAIN Makeup Gain
