Keith McMillen Instruments K-MIX User Manual
Also see for K-MIX: Quick start guide
                                                                                                                                                            | |
Contents
| 
K-M IX E DITOR86CONNECTION SYNC P RESETCONNECTION SYNC is a preset that cannot be modified, reordered, or deleted, and is always atthe top of the preset list. It is used to store K-Mix’s current state when the mixer is initially connectedto the K-Mix Editor. It is also used when you change presets from the board while connected to theeditor.This exists so you don’t lose any unsaved changes you may have made on the mixer beforeconnecting to the editor.S YNC O N C ONNECT B EHAVIORUpon opening the K-Mix Editor with a K-Mix connected to the computer, the editor syncs up withthe mixer’s current settings.1. Connect K-Mix to computer via USB.2. Open the K-Mix Editor.3. The editor syncs up all global parameters with the mixer. The editor automatically updatesto whatever the mixer’s global parameters are currently set to.4. The editor reads the mixer’s current per preset parameter states and stores them into theCONNECTION SYNC preset.5. To save this as a preset (in the editor), click the SAVE AS button while the CONNECTIONSYNC preset is selected.6. Give the new preset a name and you’re done!C HANGING P RESETS O N K-M IX W HILE C ONNECTED T O E DITOR B EHAVIORIf a preset change is initiated from the K-Mix hardware while connected to the K-Mix Editor, theeditor will sync those changes using the CONNECTION SYNC preset.1. Connect K-Mix to computer via USB.2. Open the K-Mix Editor.3. The editor reads the mixer’s current parameter states and stores them into theCONNECTION SYNC preset.4. Press the [PRESET] button on the K-Mix hardware.5. Select one of the 12 presets.6. The mixer loads the selected preset’s settings.7. The editor automatically switches over to the CONNECTION SYNC preset.8. The CONNECTION SYNC preset is updated with the newly selected preset’s settings.5.1.1.2 – S AVE B UTTONThe SAVE button is, oddly enough, used to save any changes made to the currentlyselected preset.When a change has been made to the preset, the SAVE button lights up magenta |
Related manuals for Keith McMillen Instruments K-MIX
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine