Keith McMillen Instruments K-MIX User Manual
Also see for K-MIX: Quick start guide
                                                                                                                                                            | |
Contents
| 
K-M IX H ARDWARE434.2.3 – B YPASSThe [BYPS] button is used to turn effects on and off. This can be done on a per channel basis,or an effect can be bypassed globally (all instances of an effect).Bypassing only has an effect on the compressor, gate, EQ, and reverb functionality. Nothingelse has the ability to be bypassed.This button can also reset parameters to their original state and set faders to exactly 0dB.4.2.3.1 – B YPASS E FFECTS O N I NDIVIDUAL C HANNELSTo bypass an effect on an individual channel:1. Enter the mode for the effect you want to bypass. For example, enter EQ mode if you want tobypass the EQ on a specific channel.2. Press and hold the [BYPS] button.3. The channel select button LEDs will now display the current bypass state for each channel. Green =effect on (not bypassed), Red = effect off (bypassed).4. While [BYPS] is still held down, press a channel select button to toggle that channel’s bypass state.5. Release [BYPS] to exit Bypass Mode. All LEDs will return to their normal state (for the mode you arecurrently in).Reverb is a global effect send, it is not per channel, so all channel select buttonsare linked when bypassing in Reverb mode. They will either be all green (reverbenabled), or all red (reverb bypassed). Any channel select button may be used totoggle the bypass state of the reverb.4.2.3.2 – B YPASS E FFECTS O N A LL C HANNELS S IMULTANEOUSLYTo bypass an effect on all channels at the same time:1. Press and hold the [BYPS] button. It does not matter what mode the mixer is currently in.2. The [COMP], [GATE], [EQ], and [VERB] buttons light up. If any channel has the effect enabled, thebutton will light up bright. If no track has the effect enabled, the button will be dim.3. While [BYPS] is still held down, press the [COMP], [GATE], [EQ], or [VERB] button to toggle thebypass state of all channels simultaneously.If the channels have a mixture of bypassed and non-bypassed states for an effect,the first press will bypass the effect on every channel. |
Related manuals for Keith McMillen Instruments K-MIX
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine