K-M IX E DITOR109R EVERB L EVEL S ECTIONThe Reverb Level section houses a single parameter. You guessed it! It’s Reverb Level.R EVERB L EVEL & N UMBER B OXSets the overall level of the reverb to be sent out K-Mix’s main outputs. The reverb gets mixedback into the mains at the end of the signal chain, just before the main output bus’ fader andmute.• Range: -∞dB – +6dB5.2.2 – R EVERB T ABThe reverb tab houses all of the parameters related to K-Mix’s onboard globalreverb effect. This global reverb can be mixed into the main output bus (channels1 & 2). Each of the eight input channels can be sent into the reverb at differentlevels using the reverb sends.The Reverb Level parameter can also be adjusted from the Reverb tab. Bothcontrols are linked and will always be set to the same value, regardless of where it isadjusted.K-Mix’s reverb effect can only be mixed into output channels 1 & 2. It cannot be sentout any of the other outputs.-3.00 dB -3.00 dB -3.00 dB -3.00 dB 725 ms 1400 ms70% 70%-3.00 dB -3.00 dB -3.00 dB -3.00 dBREVERB-4.51 dBReturn LevelREVERB LEVELREVERB PARAMETERSCHANNEL SEND LEVELS1 2 3 45 6 7 8POST-FADERPreDelay Decay TimeDamping Diffusion
