V10/V7.5/V5/V3.5 Installation and Operation Manual Jul.05.07Contents Page2.3 INSTALLATION 2-172.3.1 Accepting the Shipment 2-172.3.2 Unpacking Instructions 2-172.3.3 Visual Inspection 2-172.3.4 Determining Control/Monitor Requirements 2-172.3.5 Installing External Control/Monitor Wiring 2-172.3.6 Installing Ac Power Wiring 2-192.3.7 Installing the Exciter and Connecting Inputs 2-202.3.7.1 M50 Exciter(s) 2-212.3.7.2 NE30 Exciter(s) 2-192.3.8 Installing RF Feed Coaxial Cable 2-222.3.9 Station Reference Ground 2-232.4 COMMISSIONING PROCEDURES 2-242.4.1 Precautions 2-242.4.2 Turn-On Prerequisites 2-242.4.3 Initial Turn-On 2-252.4.4 Placing Transmitter On-Air 2-263 OPERATING INSTRUCTIONS3.1 INTRODUCTION 3-13.1.1 Precautions 3-13.2 EMERGENCY SHUTDOWN 3-13.2.1 Complete Shutdown 3-13.2.2 Turn Off RF Output 3-13.3 EXTERNAL SAFETY INTERLOCK 3-13.4 ELECTROSTATIC DISCHARGE PROTECTION 3-23.4.1 Discharging of Personnel 3-23.4.2 Handling/Storage 3-23.4.3 Tools/Test Equipment 3-23.4.4 Stress Current Protection 3-23.5 CONTROLS AND INDICATORS 3-23.5.1 Front Panel 3-33.5.2 Switching Power Supply Module 3-43.5.3 Control/Display PWB 3-43.5.4 Interconnect PWB 3-43.5.5 Remote Interface PWB 3-43.5.6 Power Module Interface PWB 3-43.5.7 Miscellaneous 3-43.6 DIAGNOSTIC DISPLAY 3-203.6.1 Pushbutton Switches 3-203.6.2 Main Screens 3-203.6.2.1 Transmitter Status Bar 3-203.6.3 View Faults 3-223.6.4 Change Power, Frequency or Mode 3-223.6.5 View RF Module Status and Fan Speed 3-233.6.6 View Events Log 3-24
