V10/V7.5/V5/V3.5 Installation and Operation Manual Page 1-3Section 1 General Information Issue 3.5Table 1-2: Recommended Site Test EquipmentNOMENCLATURE PART/MODEL NUMBER OR TYPE(EQUIVALENTS MAY BE USED) APPLICATIONDummy Load 50 ΩMinimum power rating of 15,000 W (V10),10,000 W (V7.5), 7,500 W (V5) or 5,000W (V3.5)VSWR 1.1 (87.5 – 108 MHz)'Off-air' testingDigital Multimeter 3 1/2 digit, ac and dc volts (10 MΩ input),ohms and amps, ±0.5% accuracy, Fluke179 or equivalentTesting andmaintenanceOscilloscope Tektronix Model TDS2022 Testing andmaintenanceModulation Monitor Belar Model FMM-2 or equivalent Modulation level setupand performancemonitoringSpectrum Analyzer HP4396B or equivalent Hybrid/All-Digital modeoutput spectrum testingAudio SignalGenerator10 Hz to 20 kHz, 600 Ω,0 to +15 dBmAudio Precision SYS-2 or equivalentSimulates modulatingaudio during testingand maintenanceDistortion Analyzer 20 Hz to 20 kHzAudio Precision SYS-2 or equivalentMeasures audiodistortion during testingand maintenanceDc Power Supply(Variable)0 – 30 V, 1 A Testing andmaintenanceTorque Screw Driver(Phillips head)Capable of torquing to six inch-pounds(0.672 Newton-Meters)Installing poweramplifier pallets orreject load resistorsHex Wrench(Allen Key)3/16 inchCapable of torquing to 120 in-lbs(Nautel Part # HY80 in ancillary kit)Terminating wires onac terminal block
