Using Network Card Setup (Mac OS X)You can use Network Card Setup to configure the network.To use Network Card Setup, TCP/IP must be activated.Setting the IP AddressConfiguring Web SettingsQuitting Network Card SetupSetting the IP Address1. Start Network Card Setup.Installing Software2. Select this machine from the list.3. Select [IP Address Settings] from the [Operations] menu.4. Change other settings if necessary, and then click [Save].5. Enter the password, and then click [OK].The default password is the last six alphanumerical digits of the MAC address.The password is case sensitive.6. Click [OK] to enable new settings.The network card of this machine restarts.Configuring Web SettingsYou can set the network settings for this machine by starting Network Card Setup.Enabling Web Settings1. Start Network Card Setup.1233
