Setting Power Save ModeIf you do not use the machine for a certain period of time, the machine automatically entersPower Save mode, saving power consumption.Alternatively, you can press the (POWER SAVE) button to manually switch the machine toPower Save mode. If you press the (POWER SAVE) button in Power Save mode, themachine returns to standby status.In Power Save mode, the (POWER SAVE) button lights up.Exiting Power Save Mode to Standby ModeTo exit Power Save mode to standby status, press the (POWER SAVE) button.MemoWhen this machine receives data from a computer or other devices, this machine returns tostandby status.Also, when the document is set in the ADF or the document glass cover is opened/closed,this machine returns to the standby status.You can register Power Save mode in the following three ways.Using the Web Page of This Machine from a ComputerThis section describes how to set Power Save mode from the Web page. You must log inas the administrator to set this setting.Using Configuration Tool (Windows Only)This section describes how to set Power Save mode from the Configuration Tool. You mustenter the administrator password to set this setting.Using the Operator PanelThis section describes how to set Power Save mode from the operator panel on themachine. You must enter the administrator password to set this setting.878
