Connecting via a USB InterfaceNoteUSB connection is disabled by factory default. You need to change the USB mode setting beforeconnecting this machine to a computer with a USB cable. Select [AdminSetup] - [Management]- [Local Interface] - [USB Menu], and then change [USB Assignment] from [IPP] to [Legacy].1. Prepare a USB cable.USB cables are not included in the package. Prepare a USB 2.0 cable separately.MemoIf you want to connect in USB 2.0 Hi-Speed mode, use a Hi-Speed USB 2.0 USB cable.2. Turn the machine and computer off.Turning the Machine Off3. Insert one end of the USB cable into the USB interface connectoron the machine.NoteDo not insert the USB cable into the network interface connector. It may cause amalfunction.4. Insert the other end of the USB cable into the USB interfaceconnector on the computer.65
