If a Power Failure OccursThe operation of the machineIf a power failure occurs, the machine operates as follows.NoteSince the machine is not turn on automatically, turn it on by pressing the power switch afterthe power is restored.The operation that uses an uninterruptible power supply (UPS) or inverter is not guaranteed.Do not use an uninterruptible power supply (UPS) or inverter.Machine'sStatusOperationDuring a call You can continue talking.During atransmissionThe transmission stops halfway.When the power is restored,If a Memory transmission is used, the machine automatically retransmits fromthe page on which the transmission stopped.If a real time transmission is used, the machine does not send the data again.Set the document, and then specify the destination again to start thetransmission.During areceptionThe reception stops halfway.If the machine received one or more pages, the erased report is printed after thepower is restored. A received image is not printed.Copying orprinting alistPrinting stops halfway.When the power is restored, start the print job again.Idle You cannot start another copy, fax, scan, or print job.You also cannot receive another fax.Stored fax dataBacking up data in MemoryThe image data stored in the Memory is retained even if a power failure occurs or youturn the machine off.Erased reportIf the fax data in Memory is lost, an erased report is printed automatically.The following documents are eligible for an erased report.Fcode Box DocumentDocuments received in MemoryAn erased report informs you of the following items of deleted data.Document typeFcode box number799