Installation RequirementsInstallation EnvironmentInstallation SpaceInstallation EnvironmentInstall the machine in the following environment.Ambient temperature: 10℃ to 32℃Ambient humidity: 20% to 80% RH (relative humidity)Maximum wet bulb temperature: 25℃NoteUse care to prevent condensation. It may cause a malfunction.If installing your machine where the ambient humidity is 30% RH or below, use a humidifieror antistatic mat.The diffusion of dust, ozone, styrene, benzene, TVOC, and ultrafine particles conforms to theEco Mark 155, "Printer" substance emission certification criteria. (Toner was tested byperforming black and white and color printing with Oki Data genuine toner cartridgesaccording to the appendix S-M of the Blue Angel RAL UZ-171:2012 test method.)Depending on the installation environment, the operation noise may be louder. If the noisebothers you, we suggest you to install the machine in the place away from you or in anotherroom.Do not install this machine in a location where temperature becomes high or near open flames.Do not install this machine in a location where chemical reactions may occur (such as alaboratory).Do not install this machine near alcohol, thinners, or other flammable solvents.Do not install this machine in a location within the reach of children.Do not install this machine in an unstable location (such as on an unsteady stand or slantedlocation).Do not install this machine in a location with high level of humidity or dust, or in a locationwhere the machine is exposed to direct sunlight.Do not install this machine in an environment where it is exposed to salty air or corrosive gas.Do not install this machine in a location where it is exposed to a high level of vibration.Do not install this machine in a location where its vent hole is blocked.36
