Administrator SetupYou can change the administrator setup. To change the setting, follow the steps below.The factory default administrator name and password are "admin" and "aaaaaa",respectively. Use them if any administrator names have not been registered yet.1. Press [Device Settings] on the touch panel.2. Press or several times and press [Admin Setup].3. Enter the administrator name and password and press [OK].4. Touch an item you want to change, and then change the setting.The settings that you can change in [Admin Setup] are as follows.If you change the default setting from the [Admin Setup] menu, and want to reflect thechanged default on the touch panel immediately, press the (HOME) button, the(COPY) button, the (SCAN) button, the (PRINT) button or the (FAX) button toswitch the function.Copy SetupYou can check and change the default settings of the copy functions for this machine.Fax SetupYou can check and change the default settings of the fax functions and other various basicsettings.FaxServer FunctionYou can check and change the default settings of the FaxServer function for this machine.Internet Fax SetupYou can check and change the default settings of the Internet Fax function for thismachine.Scanner SetupYou can check and change the default settings of the scanner functions and other variousbasic settings.Print From USB Memory SetupYou can check and change the default settings of the Print from USB Memory function forthis machine.Print SetupYou can check and change a tray configuration, print settings, and other various settingsof the print functions.Network MenuYou can check and change various settings for a network and servers.Configure Home ScreenSet the home screen with home icons.ManagementYou can check and change the time to reset the screen on the operator panel, Power Save969
