Yellow 0 in print density and frequency. Change the setting ifthe background is dark.Magenta 0Cyan 0Moisture Control Off Sets whether to enable the condensation control.Narrow Paper Speed Mode1 Sets the printing speed of narrow paper.Warmup Control Off Sets how warmup is performed.PrintPositionAdjustTray 1 X Adjust 0 mm X Adjust: Adjusts the position of the entire printingimage perpendicular to the direction of papermovement.Available range: ±2.00 mm (0.25 increments).Y Adjust: Adjusts the position of the entire printingimage parallel to the direction of papermovement.Available range: ±2.00 mm (0.25 increments).Duplex X Adjust: Adjusts the position of the imageon the back side of a duplex print perpendicular tothe direction of paper movement.Available range: ±2.00 mm (0.25 increments).Duplex Y Adjust: Adjusts the position of the imageon the back side of a duplex print parallel to thedirection of paper movement.Available range: ±2.00 mm (0.25 increments).Y Adjust 0 mmDuplexXAdjust0 mmDuplexYAdjust0 mmTray2/3/4(Optional)X Adjust 0 mmY Adjust 0 mmDuplexXAdjust0 mmDuplexYAdjust0 mmMP Tray X Adjust 0 mmY Adjust 0 mmDuplexXAdjust0 mmDuplexYAdjust0 mmDrum Cleaning OFF Sets whether to clean the drum before printing. Theimage quality improvement may be expected.Hex Dump OFF Prints out the data received from the host computerin hex. To finish printing, turn the machine off.Color MenuItem FactorydefaultsettingDescriptionDensity Control Auto Select "Auto" or "Manual" for adjusting density.Adjust Density - Adjusting density is performed right after this menu isselected.Color Tuning / PrintPattern- A test page is printed for checking the adjusting value tobe entered for any other C/M/Y/K Tuning menus.CyanTuningCyanHighlight0 Adjust the value for Highlight / Mid-tone / Dark of eachcolor within a range of -3 to +3.989
