Using Image Capture (Mac OS X)ScanningChanging SettingsTo scan using Image Capture, preparation procedure such as installation of the scannerdriver is required.Before Using Remote ScanYou also need to set the machine in the stand-by mode for Remote Scan before startingscanning on the computer.How to Use Remote ScanThe ICA driver does not support Windows.The ICA driver does not support Mac OS X 10.6.7 or earlier.Scanning1. Set a document in the ADF or on the document glass.2. Start Image Capture on the computer.3. Select the machine from the list on the left side of the ImageCapture screen.4. Click [Scan].Scanning starts.5. Select [Close Image Capture] from [Image Capture].Changing SettingsYou can adjust how a document is scanned by changing the driver settings.The following explains each setting item.If you display detailed information, you can adjust how a document is scanned in details.1. Set a document in the ADF or on the document glass.2. Start Image Capture on the computer.3. Select the machine from the list on the left side of the ImageCapture screen.4. Click [Display the detailed information].274
