Fax Error CodesError Code Description01 Your control stopped the communication.02 The capacity didn't match with the destination. Check the dest. machine.03 Your control stopped the communication.11 A document read error occurred. Try again.14 Memory Overflow.19 Your control stopped the communication.21 No dial tone was detected.Check phone line connection.22 The destination machine did not respond. Check the machine.23 The destination didn't receive the communication. Check the destination.24 No dial tone was detected. Check phone line connection.25 No dial tone was detected. Check phone line connection.26 No dial tone was detected. Check phone line connection.27 The line was busy. Try again.32 The start of communication in Super G3 mode was not completed.35 Rx failed as there was no applicable Fcode box.36 Rx was cancelled as the Fcode box was full.37 Polling Tx failed as there was no applicable Fcode box.38 Polling Tx was cancelled as the Fcode box was not accessible.39 Rx was cancelled as the Fcode box was not accessible.40 The destination machine did not respond. Check the machine.41 Tx failed with the minimum speed. Try again.43 There was no response from the destination machine. Check the machine.45 There was no response from the destination machine. Check the machine.46 There was no response from the destination machine. Check the machine.47 The wrong signal was received.Check the destination machine.48 The capacity didn't match with the destination. Check the dest. machine.49 The destination machine did not respond. Check the machine.4A Through ID check Tx, the destination was not in agreement with ID.4B Rx was rejected by Block Junk Fax function.4C The capacity didn't match with the destination. Check the dest. machine.4D The capacity didn't match with the destination. Check the dest. machine.51 Error in myself.52 Rx was cancelled as the image was not received correctly.755
