Before Using Remote ScanBefore Using Remote Scan with the ActKey, TWAIN Driver, WIA DriverBefore Using Remote Scan with WSD ScanBefore Using Remote Scan with Image Capture (Mac OS X)Setting to Use Remote ScanSelecting a Remote Scan ModeBefore using the remote scan function, you need the following settings corresponding to theconnection method and OS of your computer.NoteWhen connecting the machine to the network, set the followings.Set [TCP/IP] to [Enable].Match the IP version between the machine and a computer.Set the DNS server.MemoThe required software varies depending on the OS of your computer and the function to use.Install the appropriate software.On the Windows computer, Remote Scan function can be used with ActKey, TWAIN Driver,WIA Driver, or WSD Scan.Refer to the following.Before Using Remote Scan with ActKey, TWAIN Driver, or WIA DriverBefore Using Remote Scan with WSD ScanIf you use Mac OS X, you can use Image Capture.Refer to the following.Before Using Remote Scan with Image Capture (Mac OS X)Before Using Remote Scan with the ActKey, TWAIN Driver,WIA Driver1. Set the machine for using Remote Scan.Refer to the following.Setting to Use Remote Scan2. Set the type of stand-by mode for Remote Scan.Refer to the following.Selecting a Remote Scan Mode252
