in the machine.Registering a Computer That is ConnectedMemoYour computer may automatically be registered when the scanner driver is installed.If the computer information, such as computer name or IP address is changed, youneed to newly register the information.4. Start Network Configuration.Click [Start], and then select [All Programs] > [Okidata] > [ActKey] > [Tool] >[Network Configuration].Once installed, it automatically starts when you log on.Before Using Scan To Computer with WSD Scan1. Set the machine for using WSD Scan on the machine.2. Install this machine as a WSD device to a connected computer.For details, see "Before Using WSD Scan".When the machine is installed in the computer, the computer is also registered to themachine as a destination computer for WSD Scan.Before Using Scan To Computer with Image Capture(Mac OS X)If you use Mac OS X, you can use Image Capture.1. Set the machine for using Scan To Computer.Refer to the following.Setting for Using Network TWAIN (Network Connection)2. Install the Mac OS X scanner driver.Installing a Driver and Software to a ComputerFor the USB connection, proceed to step 4.3. Register a destination computer that is used for Scan To Computerin the machine. (For the network connection)Registering a Computer That is ConnectedMemoIf the computer information, such as computer name or IP address is changed, you needto newly register the information.4. Start Image Capture, and then select this machine from the list onthe left side of Image Capture.215
