Adjusting the DensityYou can adjust the density in seven levels.1. Press [Scan] or the (SCAN) button.2. Set a document in the ADF or on the document glass.3. Select a scan method.Sending Scanned Data as an E-mail AttachmentSaving Scanned Data in USB MemorySaving Scanned Data in a Shared FolderSpecify a destination by following the procedure for the selected scan method.4. Press [Image Settings] on the [Image Settings] tab.5. Press [Density] and press a density level.Memo[0] is the standard value. To increase the density, select [+1], [+2], or [+3] (darkest). Todecrease the density, select [-1], [-2], or [-3] (lightest).6. Change other settings if necessary, and then press the (START)button.162
