+ : Adjusted to be darker.- : Adjusted to be lighter.Cyan Mid-Tone0Cyan Dark 0MagentaTuningMagentaHighlight0MagentaMid-Tone0MagentaDark0YellowTuningYellowHighlight0YellowMid-Tone0YellowDark0BlackTuningBlackHighlight0Black Mid-Tone0Black Dark 0Cyan Density 0 Adjust the total density of each color within a range of -3to +3.+ : Adjusted to be darker.- : Adjusted to be lighter.Magenta Density 0Yellow Density 0Black Density 0Adjust Registration Color registration adjustment is performed.InkSimulationInkSimulationOFF Sets the ink simulation. This setting is enabled only forPS language jobs.UCR UCR Low Adjusts the level of under color removal.CMY100%DensityCMY100%DensityDisable Selects whether to use halftone for C, M, Y 100% density.CMYKConversionCMYKConversionON Selects whether to use simple (quick) mode whenperforming CMYK Conversion.This menu setting is disabled if using the ink simulationfunction.System Configuration MenuItem FactorydefaultsettingDescriptionPersonality Auto Selects the emulation mode. If auto is set, the correct emulation isautomatically selected every time a print job is received.AlarmReleaseManual If [Manual] is set, non-critical warnings, such as requests for a differentpaper size, can be cleared by pressing [RESET]. If [Auto] is set, thewarnings are cleared when the print job resumes.AutoContinueOFF Sets whether the machine automatically recovers from a Memoryoverflow.990
