Setting Sleep ModeWhen a set period of time elapses, this machine enters Sleep mode from Power Save mode.In Sleep mode, the status of this machine is almost the same as when this machine isturned off.In Sleep mode, the (POWER SAVE) button flashes.NoteIf an error has occurred, the machine does not enter Sleep mode.If a delayed transmission is reserved, the machine does not enter Sleep mode.If a fax transmission is waiting for a redial, the machine does not enter Sleep mode.If the wired network connection is switched to the wireless network connection, the machinedoes not enter Deep Sleep mode but enters Sleep mode.If the wireless network connection is switched to the wired network connection, the machineenters Deep Sleep mode.Exiting Sleep Mode or Deep Sleep Mode to Standby ModeTo exit Sleep mode to standby status, press the (POWER SAVE) button.MemoWhen this machine receives data from a computer or other devices, this machine returns tostandby status.Also, when the document is set in the ADF or the document glass cover is opened/closed,this machine returns to the standby status.You can register Sleep mode in the following three ways.Using the Web Page of This Machine from a ComputerThis section describes how to set Sleep mode from the Web page. You must enter theadministrator password to set this setting.Using Configuration Tool (Windows Only)This section describes how to set Sleep mode from Configuration Tool. You must enter theadministrator password to set this setting.Using the Operator PanelThis section describes how to set Sleep mode from the operator panel of this machine. Youmust enter the administrator password to set this setting.882
