Network MenuItem Factory defaultsettingDescriptionNetworkSetupNetworkSettingTCP/IP Enable Sets whether toenable TCP/IP.NetBIOS over TCP Enable Sets whether toenable NetBIOSover TCP/IP.Display condition:TCP/IP protocol isenabled.IP Address Set Auto Sets the method ofassigning an IPaddress.IPv4 Address 192.168.100.100 Sets an IP address.Display condition:TCP/IP protocol isenabled.Subnet Mask 255.255.255.0 Sets a subnet mask.Display condition:TCP/IP protocol isenabled.Gateway Address 0.0.0.0 Sets a gatewayaddress.Display condition:TCP/IP protocol isenabled.DHCPv6 Disable Selects enable /disable of DHCPwhen IPv6 is used.DNS Server (Primary) 0.0.0.0 Sets the IP addressfor a Primary DNSserver.Display condition:TCP/IP protocol isenabled.DNS Server (Secondary) 0.0.0.0 Sets the IP addressfor a SecondaryDNS server.Display condition:TCP/IP protocol isenabled.WINS Server (Primary) 0.0.0.0 Sets the name or theIP address for theWINS server.Display condition:TCP/IP protocol isenabled.WINS Server (Secondary) 0.0.0.0 Sets the name or theIP address for theWINS server.996
