ErrorReportOFF Sets whether to print error details if PostScript errors occur.PCL SetupItem FactorydefaultsettingDescriptionFont Source Resident Selects the location of the font to use.Font No. I0 Selects the font number to use.Available range: I0 to I90 if [Resident] is set/C1 to C4 if[Resident 2] is set.Font Pitch 10.00 CPI Sets the width of the PCL default font.Available range: 0.44 to 99.99 CPI. (0.01CPI increments)Font Height 12.00 point(s) Sets the height of the PCL default font.Available range: 4.00 to 999.75 point. (0.25 pointincrements)Symbol Set PC-8 Selects a PCL symbol set.A4 Print Width 78 Column Sets the number of digits for automatic line feed on A4paper.White Page Skip OFF Selects whether to print blank pages.CR Function CR Sets the machine operation when receiving CR code.LF Function LF Sets the machine operation when receiving LF code.Print Margin Normal Sets the nonprintable area of the page.True Black OFF Selects whether to print black image data using mixed CMYKor print using black toner only.Pen Width Adjust ON Sets whether to emphasize thin lines so that the lines lookthicker.TrayID#Tray 1 1 Sets a value that specifies a tray with the PCL paper sourcespecification command.Available range: 1 to 59Tray 2(Optional)5Tray 3(Optional)20Tray 4(Optional)21MP Tray 4PS SetupItem Factory defaultsettingDescriptionL1 Tray Type 1 Set the paper tray number for the Level 1 operator.[Type 1]: The effective number for paper tray starts from1.[Type 2]: The effective number for paper tray starts from0.Network PS- RAW Specifies PS communication protocol mode of data from991
