Switching Color ModesSwitches the Color Modes. You can use the following three color modes.Color: All documents are copied in full color.Mono: All documents are copied in black and white.Auto: This machine detects the color of each page automatically. (Default) Colordocuments are copied in full color, black and white documents are copied in black andwhite. Copying becomes slow.NoteWhen [Auto] is selected, printout's colors may not look as you expected in the followingcases. In such a case, set [Color] or [Mono].Here are some examples.Documents with extremely small colored partDark-colored documentsPale documentsYellowish documentsDocuments with colored backgroundMemoYou can change the criteria for determining color document and black and white document from[Device Settings] > [Admin Setup] > [Scanner Setup] > [Scanner Adjust] > [Auto Color JudgeLevel].Scanner Setup1. Press [Copy] or the (COPY) button.2. Set a document in the ADF or on the document glass.3. Press [Color Mode] on the [Basic] or [Image Settings] tab.4. Select a color mode.5. Press the (START) button.87
