14Connections (without Scart leads)If you do not have any scart leads and your TV is not Q Link type, you can connect your DVD Recorder to a TV and Satellite Receiver usingRF leads.Using this connection method may however be difficult to obtain a clear picture from the Satellite Receiver. For this reason it is notrecommended for inexperienced users.(See preferred connection on page 13.)1 Connect the aerial to the aerial input socket of theSatellite Receiver.≥If you do not have a Satellite Receiver, connect the aerial tothe RF Input socket of the DVD Recorder and go to step 3.2 Connect the aerial from Satellite Receiver to the RFInput socket.3 Connect the RF Output socket to the TV aerialsocket.4 Plug the TV, DVD Recorder and Satellite Receiverinto the mains as shown at top of the page.Note≥Switch on your Satellite Receiver; to ensure reliable tuning,select either [SKY ONE] or [SKY NEWS].≥If, after Auto Setup is complete, the programme position of thesatellite receiver is not to your preference, or “SAT” name is notshown in the programme list, you can rearrange the programmeposition and enter “SAT” name manually (See page 67).RF INRF OUTOPTICAL AV1 (TV)AV2 (DECODER/EXT)DIGITAL AUDIO OUT(PCM/BIT STREAM)R - AUDIO - L VIDEO S-VIDEOR - AUDIO - L VIDEO S-VIDEOAV4 INOUT144 324Aerial(not supplied)Aerial Input socketTV (not supplied)To AC Mains socketRF lead(not supplied)To AC Mains socketSatellite Receiver (not supplied)AC Mains lead (supplied)AC Input socketRF Output socketRF Input socketAerial Output socketRF lead (supplied)≥Must be connected towatch TV channels.Aerial InputsocketSatellite ReceiverRF INRF INRF OUTOPTICAL AV1 (TV)AV2 (DECODER/EXT)DIGITAL AUDIO OUT(PCM/BIT STREAM)R - AUDIO - L VIDEO S-VIDEOR - AUDIO - L VIDEO S-VIDEOAV4 INOUTThis unitSatellite ReceiverRF OUTRF INRF OUTOPTICAL AV1 (TV)AV2 (DECODER/EXT)DIGITAL AUDIO OUT(PCM/BIT STREAM)R - AUDIO - L VIDEO S-VIDEOR - AUDIO - L VIDEO S-VIDEOAV4 INOUTThis unit TV