Panasonic DMR-E60 Operating Instructions Manual

Also see for Diga DMR-E60: Operating instructions Firmware instructions Operating instructions

Contents

43Using PLAY LIST to edit programmes (continued)Creating PLAY LIST[RAM]You can specify start and end points to create a scene, thenspecify the order in which these scenes are played. These scenesare not recorded separately so this doesn’t use up much of thedisc’s capacity.Preparation≥Switch [DVD, TV] (19) to “DVD”.≥Insert a disc you have recorded on.1 While stoppedPress [FUNCTIONS] (11).2 Use [3, 4, 2, 1] (10) to select “CREATE PLAYLIST” and press [ENTER] (10).3 Use search functions such as fast-forward andslow-motion to find the start point of the scene andpress [ENTER] (10).4 Use search functions such as fast-forward andslow-motion to find the end point of the scene andpress [ENTER] (10).5 Use [3, 4] (10) to select “Exit” and press [ENTER](10).ªTo stop partway throughPress [RETURN] (28).ªTo clear the PLAY LIST screenPress [PLAY LIST] (27) or [RETURN] (28).The screen returns to the state it was in before you called up theplay list.ªTo specify another sceneSelect “Next” after step 4 and press [ENTER] (10), then repeatsteps 3 and 4.For your reference≥You can fast-forward, rewind, pause and slow-motion whileplaying scenes just as you can during normal play.≥One disc can have a maximum of 99 play lists and 999 scenes.These numbers may be reduced under some conditions.≥You cannot specify an end point before a start point or a startpoint after an end point.≥If you specify an end point but not a start point, the unitdetermines the beginning of the programme as the start point.Similarly, if you specify a start point but not an end point, the unitdetermines the end of the programme as the end point.≥You may not be able to specify start and end points if the materialis still pictures recorded on other equipment.≥The unit pauses play when the end of the last programme on thedisc is reached during this procedure.≥You can also display the CREATE PLAY LIST screen byselecting “– –” at the bottom of the play list.Playing PLAY LIST[RAM]Preparation≥Switch [DVD, TV] (19) to “DVD”.≥Insert a disc you created play lists on.1 Press [PLAY LIST] (27).2 Use [3, 4] (10) to select the play list you want toplay and press [ENTER] (10).≥The play list you select is played.≥You can display the play lists after the sixth one by moving[4] (10).ªTo stop PLAY LIST playPress [∫] (7).The play list appears.For your referenceYou can also select play lists from the list in step 2 by entering a 2-digit number with the numeric buttons (4).If you enter a number larger than the total number of play lists, thelast play list is selected.CREATE PLAY LISTPLAY LISTCreation0 : 00 . 05Start End3Start1EndNextExitScene No.0 : 00 . 05RETURNENTERSELECT--:--.--PLAY01PLAY LIST No.3 DinosaurPLAY LISTCreation0 : 00 . 05Start EndStart1EndNextExitScene No.0 : 35 . 20RETURNENTERSELECT0 : 35 . 203 3PLAY LIST No.301PLAY LIST- - - - - -No. Date Total Scene EditTitleAuto actionUSJ01 15/7 0060060:0302 15/7 0:0703 23/7 0040:06 Dinosaur33111111002 003004001—– – /– – :–No.RETURNENTERSELECT0 – 9PLAY LIST- - - - - -No. Date Total Scene EditTitleAuto actionUSJ01 15/7 0060060:0302 15/7 0:0703 23/7 0040:06 Dinosaur33111111002 003004001—– – /– – :–No.RETURNENTERSELECT0 – 9